Rate this post

100% Free CCNP Enterprise 300-410 Dumps PDF Demo Cert Guide Cover

PDF Exam Material 2022 Realistic 300-410 Dumps Questions

Cisco 300-410 Exam Topics:

Section Weight Objectives
Layer 3 Technologies 35% 1.Troubleshoot administrative distance (all routing protocols)
2.Troubleshoot route map for any routing protocol (attributes, tagging, filtering)
3.Troubleshoot loop prevention mechanisms (filtering, tagging, split horizon, route poisoning)
4.Troubleshoot redistribution between any routing protocols or routing sources
5.Troubleshoot manual and auto-summarization with any routing protocol
6.Configure and verify policy-based routing
7.Configure and verify VRF-Lite
8.Describe Bidirectional Forwarding Detection
9.Troubleshoot EIGRP (classic and named mode)

  • Address families (IPv4, IPv6)
  • Neighbor relationship and authentication
  • Loop-free path selections (RD, FD, FC, successor, feasible successor, stuck in active)
  • Stubs
  • Load balancing (equal and unequal cost)
  • Metrics

10.Troubleshoot OSPF (v2/v3)
– Address families (IPv4, IPv6)
– Neighbor relationship and authentication
– Network types, area types, and router types

  • Point-to-point, multipoint, broadcast, nonbroadcast
  • (ii) Area type: backbone, normal, transit, stub, NSSA, totally stub
  • (iii) Internal router, backbone router, ABR, ASBR
  • (iv) Virtual link

– Path preference
11.Troubleshoot BGP (Internal and External)

  • Address families (IPv4, IPv6)
  • Neighbor relationship and authentication (next-hop, mulithop, 4-byte AS, private AS, route refresh, synchronization, operation, peer group, states and timers)
  • Path preference (attributes and best-path)
  • Route reflector (excluding multiple route reflectors, confederations, dynamic peer)
  • Policies (inbound/outbound filtering, path manipulation)
VPNTechnologies 20% 1.Describe MPLS operations (LSR, LDP, label switching, LSP)
2.Describe MPLS Layer 3 VPN
3.Configure and verify DMVPN (single hub)

  • GRE/mGRE
  • NHRP
  • IPsec
  • Dynamic neighbor
  • Spoke-to-spoke
Infrastructure Services 25% 1.Troubleshoot device management

  • Console and VTY
  • Telnet, HTTP, HTTPS, SSH, SCP
  • (T)FTP

2.Troubleshoot SNMP (v2c, v3)
3. Troubleshoot network problems using logging (local, syslog, debugs, conditional debugs, timestamps)
4. Troubleshoot IPv4 and IPv6 DHCP (DHCP client, IOS DHCP server, DHCP relay, DHCP options)
5. Troubleshoot network performance issues using IP SLA (jitter, tracking objects, delay, connectivity)
6. Troubleshoot NetFlow (v5, v9, flexible NetFlow)
7. Troubleshoot network problems using Cisco DNA Center assurance (connectivity, monitoring, device health, network health)

Infrastructure Security 20% 1.Troubleshoot device security using IOS AAA (TACACS+, RADIUS, local database)
2.Troubleshoot router security features

  • IPv4 access control lists (standard, extended, time-based)
  • IPv6 traffic filter
  • Unicast reverse path forwarding (uRPF)

3.Troubleshoot control plane policing (CoPP) (Telnet, SSH, HTTP(S), SNMP, EIGRP, OSPF, BGP)
4.Describe IPv6 First Hop security features (RA guard, DHCP guard, binding table, ND inspection/snooping, source guard)

 

NEW QUESTION 25
Drag and drop the MPLS VPN device types from the left onto the definitions on the right.

NEW QUESTION 26
Refer to the exhibit.

ISP 1 and ISP 2 directly connect to the internet. A customer IS tracking both ISP links to achieve redundancy and cannot see the Cisco IP SLA tracking output on the router console. Which command is missing from the IP SLA configuration?

 
 
 
 

NEW QUESTION 27
Refer to the exhibit.

The server for the finance department is not reachable consistently on the 200.30.40.0/24 network and after every second month it gets a new IP address. Which two actions must be taken to resolve this Issue? (Choose two.)

 
 
 
 

NEW QUESTION 28
An engineer failed to run diagnostic commands on devices using Cisco DNA Center. Which action in Cisco DNA Center resolves the issue?

 
 
 
 

NEW QUESTION 29
Refer to the exhibit.

An IP SLA was configured on router R1 that allows the default route to be modified in the event that Fa0/0 loses reachability with the router R3 Fa0/0 interface. The route has changed to flow through router R2. Which debug command is used to troubleshoot this issue?

 
 
 
 

NEW QUESTION 30
An engineer configured a company’s multiple area OSPF head office router and Site A cisco routers with VRF lite. Each site router is connected to a PE router of an MPLS backbone.

After finishing both site router configurations, none of the LSA 3,4 5, and 7 are installed at Site A router.
Which configuration resolves this issue?

 
 
 
 

NEW QUESTION 31
Refer to the exhibit.

An engineer wanted to set a tag of 30 to route 10 1.80.65/32 but it failed How is the issue fixed?

 
 
 
 

NEW QUESTION 32
Refer to the exhibit.

A user has set up an IP SLA probe to test if a non-SLA host web server on IP address 10.1.1.1 accepts HTTP sessions prior to deployment. The probe is failing. Which action should the network administrator recommend for the probe to succeed?

 
 
 
 

NEW QUESTION 33
During the maintenance window an administrator accidentally deleted the Telnet-related configuration that permits a Telnet connection from the inside network (Eth0/0) to the outside of the networking between Friday – Sunday night hours only. Which configuration resolves the issue?
A)

B)

C)

D)

 
 
 
 

NEW QUESTION 34
Drag and drop the packet types from the left onto the correct descriptions on the right.

NEW QUESTION 35
What are two functions of IPv6 Source Guard? (Choose two.)

 
 
 
 
 

NEW QUESTION 36
Refer to the exhibit.

Which configuration denies Telnet traffic to router 2 from 198A:0:200C::1/64?

 
 
 
 

NEW QUESTION 37
Refer to the exhibit.

What does the imp-null tag represent in the MPLS VPN cloud?

 
 
 
 

NEW QUESTION 38
What are two characteristics of IPv6 Source Guard? (Choose two.)

 
 
 
 
 

NEW QUESTION 39
Refer to the exhibit.

An engineer configured IP SLA on R1 to avoid the ISP link flapping problem. but it is not working as designed IP SLA should wait 30 seconds before switching traffic to a secondary connection and then revert to the primary link after waning 20 seconds, when the primary link is available and stabilized. Which configuration resolves the issue?

 
 
 
 

NEW QUESTION 40
Refer to the exhibit.

A router receiving BGP routing updates from multiple neighbors for routers in AS 690. What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.1.1?

 
 
 
 

NEW QUESTION 41
Which component of MPLS VPNs is used to extend the IP address so that an engineer is able to identify to which VPN it belongs?

 
 
 
 

NEW QUESTION 42
Refer to the exhibit.

An IT staff member comes into the office during normal office hours and cannot access devices through SSH Which action should be taken to resolve this issue?

 
 
 
 

NEW QUESTION 43
Refer to the exhibit.

An administrator noticed that after a change was made on R1, the timestamps on the system logs did not match the clock.
What is the reasons for this error?

 
 
 
 

NEW QUESTION 44
Which configuration enables the VRF that is labeled ”inet” on FastEthernet0/0?
A)

B)

C)

D)

 
 
 
 

Updated Cisco 300-410 Dumps – PDF & Online Engine: https://www.2pass4sure.com/CCNP-Enterprise/300-410-actual-exam-braindumps.html

         

Related Links: www.stes.tyc.edu.tw myportal.utt.edu.tt myportal.utt.edu.tt www.stes.tyc.edu.tw www.stes.tyc.edu.tw myportal.utt.edu.tt