Pass HP HPE6-A72 With 2Pass4sure Exam Dumps – Updated on Jun-2022 [Q39-Q63]

HPE6-A72 HP

admin • June 24, 2022

Pass HP HPE6-A72 With 2Pass4sure Exam Dumps – Updated on Jun-2022 [Q39-Q63]

Rate this post

Pass HP HPE6-A72 With 2Pass4sure Exam Dumps – Updated on Jun-2022

Fully Updated HPE6-A72 Dumps – 100% Same Q&A In Your Real Exam

NEW QUESTION 39
Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?

Core(config-if-vlan)# vrf attach Green

Core(config-if-vlan)# ip vpn-instance Green

Core(config-if-vlan)# ip vrf forwarding Green

Core(config-if-vlan)# routing-context Green vrf

NEW QUESTION 40
Aruba Access Points tunnel traffic in a campus to the Mobility Controller using which protocol?

Control and Provisioning of Wireless Access Points (CAPWAP)

Generic Routing Encapsulation (GRE)

Lightweight Access Point Protocol (LWAPP)

Process Application Programming Interface (PAPI)

NEW QUESTION 41
Match the term to the correct description.

NEW QUESTION 42
The customer has 778 developers testing computer games on the network.
Which two actions resolve Broadcast storms? (Choose two.)

Manually disable the redundant link to immediately resolve the impacted portion of the network.

Utilize Spanning Tree to dynamically disable all redundant links in a segment.

Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).

Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.

Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.

NEW QUESTION 43
Refer to the exhibit.

What command will display the debug l2mac events?

show module L2MAC

show debug terminal

show debug buffer module L2MAC

show debug all

NEW QUESTION 44
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?

No password is set for this account.

“password”

“forgetme!”

The same login password that has lost originally.

Explanation/Reference: https://www.arubanetworks.com/techdocs/ArubaOS_83_Web_Help/Content/ArubaFrameStyles/ Management_Utilities/enab_radsec_reset_admin_enabl_pwd.htm

NEW QUESTION 45
Refer to the exhibit.

The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command?

Option A

Option B

Option C

Option D

NEW QUESTION 46
Match each network protocol to the correct default listening port and transport protocol. Not all answers will be used.

NEW QUESTION 47
With what other technology does Half Duplex communication closely match?

a pair of fiber optic strands allowing transmit on one and receive on the other at the same time

a mobile phone call

point-to-point connections between two switches allowing concurrent transmit and receive

CB radio using push-to-talk

NEW QUESTION 48
Which two options are the Layer 3 Routing protocols? (Choose two.)

BGP

LLDP

OSPF

MPLS

802.3ad

NEW QUESTION 49
What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)

SNMPv2c

HTTPS

USB-C console

Telnet

SSH

NEW QUESTION 50
What are two features in a 2-Tier design that are implemented at the Access layer? (Choose two.)

VPN access

WAN/MPLS connectivity

Endpoint Access

Deep packet inspection

Power over Ethernet

NEW QUESTION 51
Which field in the IPv4 header indicates whether the IP packet carries TCP or UDP traffic?

Protocol

IHL

TTL

Identification

NEW QUESTION 52
What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)

routing loops

costs associated with upgrading from copper to fiber

multiple frame copies leading to instability of the MAC address table

security issues with a redundant loop indicating to hackers that a back-door exists

broadcast storms

NEW QUESTION 53
Match the terms to the correct layer of the OSI model.

NEW QUESTION 54
Refer to the exhibit.

The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?

Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.

Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.

Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.

Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.

NEW QUESTION 55
Match each description to the correct term.

NEW QUESTION 56
Refer to the exhibit.

What configuration is needed in order for “show LLDP configuration” to show this output?

none; LLDP is enabled by default on Aruba switches

configuring LLDP both globally and on the interfaces

enabling LLDP on the interfaces only

configuring LLDP globally only

NEW QUESTION 57
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)

allows transmissions of up to 4.8Gbps

is an emerging satellite connection standard to allow wireless access anywhere in the world

operates only in the 5GHz similar to 802.11ac

operates in both the 2.4GHz and 5GHz radios bands

is the first WLAN standard to no longer use electromagnetic signals to transmit data

Explanation/Reference:

NEW QUESTION 58
Which statement is correct regarding powering an Aruba Access Point?

PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.

Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.

PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.

Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.

NEW QUESTION 59
What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)

Offloading processing from the Core without routing at the Access layer.

Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.

Lowering the cost of a deployment due to needing less switches overall.

Better scalability in a campus with a large number of buildings.

Gaining the flexibility to connect the Data-Center to any Access layer switch.

NEW QUESTION 60
Refer to the exhibit.

The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?

Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.

Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.

Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.

Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.

NEW QUESTION 61
What command displays information regarding the secondary image installed on an AOS-CX switch?

show secondary

show version detail

show version

show images

NEW QUESTION 62
Which two statements are true regarding Checkpoints on Aruba switches? (Choose two.)

Rolling back to a prior checkpoint triggers a reboot of the switch.

Stacking switches using VSF or VSX will disable the Checkpoint feature.

A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.

System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.

Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.

NEW QUESTION 63
Interface 1/1/1 is up
Admin state is up
Link transitions: 1
Description: TO_PC-1
Hardware: Ethernet, MAC Address: 00:11:22:33:44:55
MTU 1500
Type 1GbT
Full-duplex
qos trust none
Speed 1000 Mb/s
Auto-negotiation is on
Flow-control: off
Error-control: off
MDI mode: MDIX
VLAN Mode: access
Access VLAN: 1111
Which command will produce the above output?