SAP C-THR82-2205 Exam Dumps [2022] Practice Valid Exam Dumps Question [Q12-Q32]

C-THR82-2205 SAP

admin • December 27, 2022

SAP C-THR82-2205 Exam Dumps [2022] Practice Valid Exam Dumps Question [Q12-Q32]

Rate this post

SAP C-THR82-2205 Exam Dumps [2022] Practice Valid Exam Dumps Question

C-THR82-2205 Dumps – Grab Out For [NEW-2022] SAP Exam

NO.12 Which of the following apply to the Rater section?
Note: There are 2 correct answers to this question.

Custom roles CANNOT be included as participants.

Categories can always be removed if the user has permissions to edit the section.

The list pre-populates with participants based on the relationship of their role to the employee being evaluated.

Warning or error messages can be defined if the total number of participants is exceeded or NOT met.

NO.13 You have configured a field in the goal plan XML, but you can only see it when you create/edit the goal. It does NOT appear in the plan or as a display option. What else do you need to check?
Note: There are 2 correct answers to this question.

Check the Form layout in goal plan XML.

Check whether showlabel=”true” in the field definition in the goal plan XML.

Check the Plan layout in goal plan XML.

Check whether viewdefault=”on” in the field-definition in the goal plan XML.

NO.14 Where can you associate a route map with a performance form template?
Note: There are 2 correct answers to this question.

Manage Templates > Advanced Settings

Manage Templates > General Settings

Manage Route Maps > Related Templates

Manage Templates > General Settings > Show advanced options

NO.15 What can you do to a competency in Admin Center?
Note: There are 2 correct answers to this question.

Associate a competency with an achievement.

Edit the competency description.

Mark the competency as core.

Remove a job-specific competency from an existing form.

NO.16 You are calibrating overall ratings using performance as data source. What are some of the requirements for the Calibration Session to be successfully validated?
Note: There are 3 correct answers to this question.

The calibration template to be used in the Calibration Session must be specified.

The Calibration Session date must be defined.

The subject(s) of the Calibration Session must be defined.

All the subjects’ review forms must be at the calibration step in the route map.

The location of the Calibration Session must be specified.

NO.17 How can you set up rating scales in your performance form template?
Note: There are 2 correct answers to this question.

You can set a main rating scale from General Settings.

You can change the rating scale on live forms.

You can set a rating scale in a custom section.

You can assign more than one rating scale to your ratable sections.

NO.18 You are editing the global settings in the goal plan template. The following settings are made:share-confirm=”true” and unshare-confirm=”true”. How would you expect the system to behave?

When you change the visibility of a goal, a notification appears.

When the visibility of a goal is set to private, a notification does NOT appear.

When the goal completion is set to 100%, a notification appears.

When you share/unshare a team goal with another manager, a notification appears.

NO.19 Review the following images. In the first image, the administrator is finalizing several Calibration Sessions at once. But, in the second image, the administrator receives this warning message. What does the warning message in the second image mean?

The number of sessions to be finalized exceeds the Online Mass Finalization Threshold set in Calibration Settings.

NO sessions will be finalized, regardless of the Online Mass Finalization Threshold set in Calibration Settings.

The number of sessions to be finalized exceeds the default Online Mass Finalization Threshold of 25.

NO sessions will be finalized, regardless of the default Online Mass Finalization Threshold of 25.

NO.20 Which attribute controls the editability of the goal plan fields when you assign a Group Goal 2.0 or a team goal?
Note: There are 2 correct answers to this question.

The allow-group-goal=”true” attribute in obj-plan-template

The cascade-update=”regular” attribute in field-definition

The configurable=”true” attribute in objective-sect

The cascade-update=”push-down” attribute in field-definition

NO.21 Where can you update translations for a standard element?
Note: There are 2 correct answers to this question.

In Manage Business Configuration UI

In Configure People Profile

In Picklist Center

In the Succession Data Model

NO.22 Which of the following are characteristics of an EZ Rater section?
Note: There are 3 correct answers to this question.

The items within the EZ Rater section will collapse by default.

EZ-Rater can be turned on from Admin Center -> Manage Templates.

<sect-mode=”EZ-Rater”> can be configured for Goal and Competency sections to compare employee and manager ratings -> side by side.

EZ Rater includes an on-form Gap Analysis graph.

<sect-mode=”EZ-Rater”> can be configured for the Competency section only, to compare employee and manager ratings -> side by side.

NO.23 What can an administrator do when accessing the Delete Continuous Feedback page?
Note: There are 2 correct answers to this question.

The administrator can only delete feedback given in the last three months.

The administrator CANNOT restore feedback once the feedback is deleted.

The administrator can delete only feedback given or received by active users.

The administrator can access all information, including feedback content from others.

NO.24 What does the “Enable force route button in validation step” calibration feature do?

Automatically routes forms to the next step in the route map after a Calibration Session is finalized

Automatically populates valid participants and subjects based on the Calibration Session owner

Enables the option for the facilitator to edit ratings and finalize forms in the Calibration Session

Enables the option to route existing forms into the calibration route map step when setting up a Calibration Session

NO.25 Which of the following can a manager use from the Team Overview tab?
Note: There are 3 correct answers to this question.

The Get Feedback feature, to collect additional comments on the form

The Ask for Feedback button, to send an e-mail to internal or external users

The Stack Ranker, to evaluate objectives for their direct reports

The Confirm 1:1 Meeting button, to send a form to the signature step without opening it.

The Stack Ranker, to evaluate competencies for their direct reports

NO.26 The standard goal plan template includes four goal categories. Your customer wants to use only three of the standard categories. How do you delete a goal category from the goal plan template?
Note: There are 2 correct answers to this question.

Remove the permission to view the category in the goal plan XML template.

Delete all the code for the unwanted category from the goal plan XML template.

Choose the Delete icon next to the category name in Admin Center -> Manage Templates.

Delete the Plan Layout section from the goal plan XML template.

NO.27 What happens when the minimum/maximum goal count per category is set in the goal plan?

When a user creates a goal outside the minimum/maximum goal limits, the system provides a hard warning and the user CANNOT proceed.

When the user creates a goal, the minimum/maximum limit for the overall goal must be defined.

When the user creates goals, the same minimum/maximum value must be used for each of the goals.

When a user creates a goal outside the minimum/maximum goal limits, the system provides soft warnings and the user can proceed.

NO.28 If you are using distribution guidelines in calibration, where are they visible?
Note: There are 3 correct answers to this question.

Executive review

Dashboard view

List view

Matrix Grid view

Bin view

NO.29 You are configuring hidden-threshold = “2” for the Direct Report category. What can happen when the subject of the form has only one direct report in the list of raters?
Note: There are 2 correct answers to this question.

The hidden-threshold attribute can cause an error message to be displayed with the number of users in the direct report category.

The hidden-threshold attribute can cause a message to be displayed that states the minimum is NOT met for the direct report category.

The hidden-threshold attribute can cause the Direct Report category to roll up with another category in the Detailed 360 L1 Report.

The hidden-threshold attribute can cause the direct report category to be dropped from the Detailed 360 Report.

NO.30 How are competencies populated in the competency section of a form?
Note: There are 3 correct answers to this question.

Competencies mapped to the users1 job roles by the administrator are visible in the Job Specific Competency section.

Competencies are hard-coded in the Custom Competency section from Manage Templates or in the XML.

Users add competencies manually in the form when the section is <configurable=”true”>.

Managers assign Core Competencies to their direct reports from the Org Chart.

Administrators assign competencies to users from Admin Center.

NO.31 A user who is NOT defined in the route map needs to provide ratings and comments in the performance review. Which of the following are required to achieve this?
Note: There are 2 correct answers to this question.

The Disable Ask For Comment Routing option should be disabled.

The user should have access to Unofficial User Rating.

The Disable Ask For Edit Routing option should be disabled.

The user should have access to Subject Rating.

NO.32 A user is uploading attachments to activities in continuous performance management (CPM).Which of the following are possible?
Note: There are 2 correct answers to this question.

The user can upload a maximum of 5 attachments per activity.

The user can upload attachments to activities in both legacy and latest CPM versions.

The user can upload an attachment to their own activity or to an activity created on their behalf.

The user can only download an attachment they have previously uploaded.

Loading …