Prepare 1Z0-902 Exam Questions [2023] Recently Updated Questions [Q20-Q35]

1Z0-902 Oracle

admin • May 31, 2023

Prepare 1Z0-902 Exam Questions [2023] Recently Updated Questions [Q20-Q35]

Rate this post

Prepare 1Z0-902 Exam Questions [2023] Recently Updated Questions

Give push to your success with 1Z0-902 exam questions

NEW QUESTION 20
Which two statements are correct about adding an additional database server to a physical Exadata X9M Database Machine using Oracle Exadata Deployment Assistant (OEDA)?

Do not proceed if the OEDA Validate Configuration File step displays an error message about missing files p6880880.zip.

Executing /opt/oracle.supportTools/reclaimdisks.sh -free -reclaim on each Exadata X9M Database server is required to reclaim disk space and perform partition reconfiguration.

In order to configure the servers with Oracle Exadata Deployment Assistant (OEDA), the new server information must be entered in OEDA, and the configuration file must contain existing nodes.

The applyElasticConfig.sh script performs network configuration for the new servers. The new servers are restarted at the end of the process.

It is required to install OEDA on the first new database server.

It is not necessary to execute /opt/oracle.supportTools/reclaimdisks.sh -free -reclaim on each Exadata X9M Database server, nor is it required to install OEDA on the first new database server. In order to configure the servers with Oracle Exadata Deployment Assistant (OEDA), the new server information must be entered in OEDA, and the configuration file must contain existing nodes.
Search results: [1] Refer to the Oracle Exadata Database Machine X9M Implementation Essentials documentation for more information on adding an additional database server to a physical Exadata X9M Database Machine using Oracle Exadata Deployment Assistant (OEDA). [2] Oracle Exadata Deployment Assistant (OEDA) is a graphical user interface (GUI) tool used to configure the Oracle Exadata Database Machine X9M. [3] This article provides the step-by-step instructions to add an additional database server to a physical Exadata X9M Database Machine using Oracle Exadata Deployment Assistant (OEDA). [4] It is important to run the OEDA Validate Configuration File step prior to adding the new server to ensure the configuration file is valid and that all required files exist. [5] When adding a new database server with OEDA [1], the configuration file must contain the existing nodes and the new server information must be entered in OEDA. [6] The applyElasticConfig.sh script must be executed to configure the new servers, after which the new servers will be restarted.

NEW QUESTION 21
Which four actions should you take before proceeding with applying updates to your Exadata Database Machine?

Consult My Oracle Support note 888828.1 to determine the current recommended Exadata software release.

Check the Exadata Critical Issues My Oracle Support note 1270094.1 for any issues not added to the latest version of exachk.

Run exachk and resolve only WARNINGS that you have not seen before.

Run the appropriate patchmgr preqequisite check step for each component being updated.

Run patchmgr –all_comp -autofix -autobackup -upgrade -rolling.

For database servers, perform a server backup using patchmgr -dbnodes db_list_file -backup -rolling.

NEW QUESTION 22
You must drop all celldisks on all the storage servers in an X9M-2 quarter rack as part of a reconfiguration project.
Which three statements describe the account on the storage servers which you should use and the tool that may be used to drop the celldisks?

to the CELLADMIN account by calling CELLCLI on all cells using DCLI

to an administrator-created storage server user with appropriate privileges on celldisk objects by calling CELLCLI on all cells using exadcli

to the CELLMONITOR account using cellcli interactively on each storage server

to an administrator-created storage server user with appropriate privileges on celldisk objects by calling EXACLI on all cells using exadcli

to the CELLMONITOR account calling CELLCLI on all cells using DCLI

to the CELLADMIN account using cellcli interactively on each storage server

NEW QUESTION 23
Which three statements are true about the CELLCLI command?

It can execute commands on multiple storage servers in parallel.

It has command-line history.

It requires root privileges to create CELLDISKS and GRIDDISKS.

It can be executed on storage servers.

It can be executed using the DCLI utility.

The statements that are true about the CellCLI command are:
It has command-line history . According to 1, you can use the up and down arrow keys to scroll through previous commands that you entered in CellCLI . You can also use Ctrl+R to search for a previous command by entering part of it .
It can be executed on storage servers . According to 1, you can invoke CellCLI by logging in to the Exadata cell as cellmonitor , celladmin , or root user and typing “cellcli” . Within CellCLI , you can perform various management and monitoring tasks for the cell134.
It can be executed using the DCLI utility . According to 5, DCLI (distributed CLI) is another utility that can be used to execute scripts and commands across multiple storage cells from a single interface. You can use DCLI to run CellCLI commands on multiple cells at once54.

NEW QUESTION 24
Which two of the following network connection types can be deployed on the client network ports of an Exadata X9M-2 Database Server?

2x 25Gb ports on eth1 and eth2 using SFP28 transceivers and OM4 fiber cable for backup network, and 2x 25Gb ports on eth5 and eth6 using
SFP28 transceivers and OM4 fiber cable for client network

2x 25Gb ports on eth1 and eth2 using SFP28 transceivers and OM4 fibre cable for client network, and 2x 10Gb ports on eth9 and eth10 using RJ45 cat6 cable for backup network

2x 10Gb ports on eth1 and eth2 using FU45 cat6 cable for client network, and 2x 25Gb ports on eth11 and eth12 using SFP28 transceivers and OM4 fiber cable for backup network

2x 25Gb ports on eth1 and eth2 using SFP28 transceivers and OM4 fiber cable for backup network, and 2x 10Gb ports on eth3 and eth4 using RJ45 cat6 cable for client network

NEW QUESTION 25
You are updating your Exadata X9M-2 Elastic Database Machine with 6 database servers and 12 High Capacity Storage Servers. You will be using patchmgr to apply updates across the entire machine while still maintaining database availability.
Assuming you are driving patchmgr from an external server, which statement is true about the execution phase?

patchmgr must be invoked with the -rolling argument. Each component type must be upgraded independently of the other.

patchmgr must be invoked with the -rolling argument with all database and storage servers listed in a single input file.

patchmgr will apply patches in component groups consisting of 1 database server and 2 storage servers to minimize disruption.

patchmgr cannot apply updates in a rolling manner, you must manually apply patches with the dbnodeudpate and cellupdate tools if high availability is required.

NEW QUESTION 26
What are two recommended configuration best practices for backup and recovery on Exadata?

Placing the backup network on dedicated switches installed in the top of the rack (ToR) has the benefits of isolating the backup network from other workloads and providing a greater level of control.

Even if the backup was limited to writing to four tape drives, eight channels could be specified to expedite the restore process.

The internal Recovery Appliance backup and restore processing is optimized when the RMAN FILESPERSET parameter is set to 1 for the level 1 incremental backup set.

When off-site long-term backup retention is needed, use Oracle Database Backup Cloud Service as a low-cost, offsite scalable storage for a disaster recovery solution.

NEW QUESTION 27
Which two statements are correct about adding an additional database server to a physical Exadata X9M Database Machine using Oracle Exadata Deployment Assistant (OEDA)?

Do not proceed if the OEDA Validate Configuration File step displays an error message about missing files p6880880.zip.

Executing /opt/oracle.supportTools/reclaimdisks.sh -free -reclaim on each Exadata X9M Database server is required to reclaim disk space and perform partition reconfiguration.

In order to configure the servers with Oracle Exadata Deployment Assistant (OEDA), the new server information must be entered in OEDA, and the configuration file must contain existing nodes.

The applyElasticConfig.sh script performs network configuration for the new servers. The new servers are restarted at the end of the process.

It is required to install OEDA on the first new database server.

https://docs.oracle.com/en/database/oracle/oracle-database/21/ladbi/db-on-exadata.html

NEW QUESTION 28
Which two statements are false about backup to ZFS Storage Appliance (ZFSSA)?

ZFSSA may connect directly to the Exadata 100Gb RoCE network switches.

Top of Rack (ToR) switches are managed as part of the hardware stack and software levels are upgraded during the patching process.

When backing up multi-rack systems, sharing Exadata X9M switches is recommended.

ZFS Snapshots can provide rapid cloning of development and test environment.

NEW QUESTION 29
Which statement is true about the Persistent Memory Commit Accelerator?

Persistent Memory Commit Accelerator tracks changes to Persistent Memory Data Accelerator to ensure duplicate blocks are not written to Flash.

Persistent Memory Commit Accelerator helps to further reduce redo log write latency by using Persistent Memory and Remote Direct Memory Access (RDMA).

Persistent Memory Commit Accelerator copies redo log data from disk for faster redo apply on Data Guard Standby Databases.

Persistent Memory Commit Accelerator contains logging information from all tiers of the software stack for rapid triage and diagnostics.

Persistent Memory Commit Accelerator reduces redo log write latency by using Persistent Memory and RDMA before flushing to Flash then disk.

Persistent Memory Commit Accelerator reduces redo log write latency by using Persistent Memory and RDMA before flushing to Flash then disk. This helps to further reduce redo log write latency by utilizing the speed and low latency of Persistent Memory, along with the Remote Direct Memory Access (RDMA) protocol, to commit changes to disk faster. This allows the system to quickly commit changes to disk, resulting in improved performance and reduced latency.

NEW QUESTION 30
Which are two correct statements for managing virtual deployment using Oracle Exadata Deployment Assistant (OEDA)?

OEDA allows customers to have both bare metal (BM) and virtual machine (VM) in an Exadata X9M Quarter Rack.

There is no limit on the number of VMs in an Exadata rack as long as the Exadata rack has adequate resources.

OEDA deployment steps include calibrate cells, create cell disks, and resecure machine.

OEDA sets up key-based authentication for the root user by using the setuprootssh.sh utility included with OEDA.

Oracle Exadata Deployment Assistant (OEDA) enables customers to deploy Oracle Exadata Database Machine in virtualized environments and it support both bare metal and virtual machine deployment in an Exadata X9M Quarter Rack.

NEW QUESTION 31
You are updating your Exadata X9M-2 Elastic Database Machine with 6 database servers and 12 High Capacity Storage Servers. You will be using patchmgr to apply updates across the entire machine while still maintaining database availability.
Assuming you are driving patchmgr from an external server, which statement is true about the execution phase?

patchmgr must be invoked with the -rolling argument. Each component type must be upgraded independently of the other.

patchmgr cannot apply updates in a rolling manner, you must manually apply patches with the dbnodeudpate and cellupdate tools if high availability is required.

patchmgr will apply patches in component groups consisting of 1 database server and 2 storage servers to minimize disruption.

patchmgr must be invoked with the -rolling argument with all database and storage servers listed in a single input file.

According to Oracle documentation12, patchmgr is the utility used to update software for Exadata infrastructure components. It can apply patches in a rolling or non-rolling manner depending on the argument and input file provided.

NEW QUESTION 32
I/O performance of the prod database on your Exadata Database Machine has degraded slightly over the past month. The database has been allocated to the OLTP I/O Resource Management (IORM) category.
Which two monitoring tools might be useful in examining I/O performance for the prod database?

OS I/O metrics using Enterprise Manager host pages for the storage servers

OS I/O metrics using OS tools such as iostat on the database servers

I/O-specific dynamic performance views such as v$iostat_fiie, v$iostat_function, and v$iostat_consumer_group from the prod database instances using SQL *p1us

cellcli (or exacli/exadcli) to examine storage server metrics such as database, category, ceiidisk, and griddisk

OS I/O metrics using OS tools such as iostat on the storage servers

1. OS I/O metrics using Enterprise Manager host pages for the storage servers: Enterprise Manager provides a detailed view of the storage server’s performance including I/O metrics and statistics. You can use these metrics to analyze I/O performance and identify any bottlenecks.
2. cellcli (or exacli/exadcli) to examine storage server metrics such as database, category, ceiidisk, and griddisk: These commands are used to gather information about storage server performance, including I/O statistics, disk usage, and resource allocation.

NEW QUESTION 33
Which two Exadata security features would you configure to control which databases can access which griddisks, when multiple databases share space on your storage servers in an unpartitioned storage grid?

Exadata storage realms using ASM-scoped security mode

File permissions on the griddisks in each database server

Using EXADCLI instead of CELLCLI to create the griddisks

File permissions on the griddisks in each storage server

Exadata storage realms using database-scoped security mode

When multiple databases share space on the storage servers in an unpartitioned storage grid, two Exadata security features can be configured to control which databases can access which griddisks.
Exadata storage realms using ASM-scoped security mode: This feature allows you to create storage realms and assign them to specific databases. This allows you to control which databases have access to which griddisks. The ASM-scoped security mode applies to all griddisks within an ASM disk group, which means that all griddisks in a disk group will be accessible only to the databases that belong to the assigned storage realm.
File permissions on the griddisks in each storage server: This feature allows you to configure file permissions on the griddisks at the storage server level. You can assign specific permissions to specific users or groups, allowing you to control which databases can access which griddisks.

NEW QUESTION 34
Which two statements are false about backup to ZFS Storage Appliance (ZFSSA)?

ZFSSA may connect directly to the Exadata 100Gb RoCE network switches.

Top of Rack (ToR) switches are managed as part of the hardware stack and software levels are upgraded during the patching process.

When backing up multi-rack systems, sharing Exadata X9M switches is recommended.

ZFS Snapshots can provide rapid cloning of development and test environment.

1. ZFS Storage Appliance (ZFSSA) can’t connect directly to the Exadata 100Gb RoCE network switches. ZFSSA uses Fibre Channel protocol to connect to the Exadata storage cells. C. When backing up multi-rack systems, sharing Exadata X9M switches is not recommended. Each rack should have its own switches to minimize the risk of data loss due to switch failure.

NEW QUESTION 35
Which two Exadata security features would you configure to control which databases can access which griddisks, when multiple databases share space on your storage servers in an unpartitioned storage grid?

Exadata storage realms using ASM-scoped security mode

File permissions on the griddisks in each database server

Using EXADCLI instead of CELLCLI to create the griddisks

File permissions on the griddisks in each storage server

Exadata storage realms using database-scoped security mode

Exadata storage realms using ASM-scoped security mode allows you to control which database can access which griddisks by creating realms at the ASM level, thereby allowing you to limit the access of each database to the griddisks that it needs to access. This is covered in section 3.15.2 of the Oracle Exadata Database Machine X9M Implementation Essentials Official Text Book and Resources [1].
Exadata storage realms using database-scoped security mode allows you to control which database can access which griddisks by creating realms at the database level [1], thereby allowing you to limit the access of each database to the griddisks that it needs to access. This is covered in section 3.15.3 of the Oracle Exadata Database Machine X9M Implementation Essentials Official Text Book and Resources [2].
[1] https://docs.oracle.com/en/engineered-systems/exadata-database-machine/x9m/exad-implementing-database-machine-x9m.pdf [2] https://docs.oracle.com/en/engineered-systems/exadata-database-machine/x9m/exad-implementing-database-machine-x9m.pdf

Loading …