Dec-2022 FREE Cisco 300-625 PRACTICE QUESTIONS AND ANSWERS UPDATES [Q10-Q24]

300-625 Cisco

admin • December 11, 2022

Dec-2022 FREE Cisco 300-625 PRACTICE QUESTIONS AND ANSWERS UPDATES [Q10-Q24]

4.5/5 - (2 votes)

Dec-2022 FREE Cisco 300-625 PRACTICE QUESTIONS AND ANSWERS UPDATES

DEMO FREE BEFORE YOU BUY 300-625 DUMPS

Becoming adept at Cisco MDS 9000 series switches and gaining updated skills that are crucial for data center management is possible if one secures passing grades in Cisco 300- 625 exam. With its latest and updated content, the obtained understanding would be of the highest grade and will help one to get an edge over others.

NEW QUESTION 10
A storage administrator manually configure a storage switch to use a new static domain ID. After issuing an fcdomain restart vsan 1 command, the administrator sees that the switch is still using the existing domain ID. What is the reason why the configuration is not working?

Static domain IDs apply only after a switch is rebooted.

The disruptive keyword was not used on the command.

Build fabric notifications were not sent to the other switches.

Domain manager fast restart is not enabled on the switch.

NEW QUESTION 11
Refer to the exhibit.

What is the result of merging the fabric?

The merged fabric IVR VSAN topology is set to activate.

The merged fabric has NAT enabled.

The merge is invalid.

The merged fabric contains only service group Group1.

Section: Implementation

NEW QUESTION 12
Which Cisco NX-OS command displays the VSAN that is associated with each FCID?

show fcdomain

Show fc2 plogi

show vsan database

show flogi database

NEW QUESTION 13
Which Cisco NX-OS command displays the VSAN that is associated with each FCID?

show fcdomain

show fc2 plogi

show vsan database

show flogi database

Section: Deployment

NEW QUESTION 14
What does an unlicensed DCNM SAN fail to display?

Fibre Channel, FCoE, and iSCSI topologies

events and fault management

historical performance monitoring

real-time performance monitoring

Section: Management and Monitoring

NEW QUESTION 15
Refer to the exhibit. An engineer is configuring Inter-VSAN routing for two Cisco MDS switches.
The FSPF cost between the switches is 500, and the Cisco MDS core virtualizes an IVR NAT domain as shown. Which statement about the topology is correct?

The MDS-Core simulates an IVR NAT, and the FSPF cost is 500.

The MDS-Core simulates an IVR NAT, and increases the cost to 501.

The MDS-Core simulates an IVR NAT, and decreases the cost to 400.

The MDS-Core simulates an IVR NAT, and increases the cost to 600.

NEW QUESTION 16
Which condition requires using a device alias rather than a Fibre Channel alias?

The zone database must be distributed over the fabric.

The same alias must be used in zoning as well as DPVM.

All aliases being used are being configured in the same VSAN.

Aliases must be saved within a central database on the fabric.

NEW QUESTION 17
Refer to the exhibit.

The san-user must configure FSPF on the VSAN 500, but fails. An operator with network administrative rights must authorize the san-user to perform this work. Which configuration must the operator apply?

MDS-A(config)# role name sangroup
MDS-A(config-role)# no rule 2

MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 4 permit config feature fspf

MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 2 permit config feature vsan

MDS-A(config)# role name sangroup
MDS-A(config-role)# vsan policy deny
MDS-A(config-role-vsan)# permit vsan 500

NEW QUESTION 18
Which command identifies the application and the user that have a Cisco Fabric Services session open?

show cfs application

show zoneset active

show cfs lock

show device-alias database

NEW QUESTION 19
Refer to the exhibit.

Which configuration change improves the ability of the link to recover from frame loss?

Increase the reset timeout.

Enable selective acknowledgment.

Increase the send buffer size to 15000 KB.

Disable PMTU discovery.

Section: Implementation
Explanation

NEW QUESTION 20
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?

MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual

MDS(config)# fcsp esp manual

MDS(config)# interface fc 1/1 MDS(config-if)# fcsp mode gcm MDS(config-if-fcsp)# fcsp esp manual

MDS(config)# interface fc 1/1 MDS(config-if)# fcsp esp manual MDS(config-if-fcsp)# mode gcm

NEW QUESTION 21
Refer to the exhibit.

Refer to the exhibit. The san-user must configure FSPF on the VSAN 500. but fails. An operator with network administrative rights must authorize the san-user to perform this work. Which configuration must the operator apply?

MDS-A(config)# role name sangroup
MDS-A(config-role># no rule 2

MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 4 permit config feature fspf

MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 2 permit config feature vsan

MDS-A(config)# role name sangroup
MDS-A(config-role)# vsan policy deny
MDS-A(config-role-vsan)# permit vsan 500

NEW QUESTION 22
Refer to the exhibit.

Refer to the exhibit. A port channel has been configured between a Cisco MDS and a Cisco Fabric Interconnect switch. Which interface(s) in the port channel carry the control plane traffic?

per packet, balanced between interfaces fc1/9 and fc1/10

from interface fc1/9

from interface fc1/10

per flow, balanced between interfaces fc1/9 and fc1/10

NEW QUESTION 23
Refer to the exhibit. Which command is used to determine which switch has the lock?

show fcs ie vsan

show zoneset active

show zone status

show flogi database

NEW QUESTION 24
Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?

ROMMON

BIOS

NX-OS

BASH

Section: Deployment

Loading …

Requirements to Fulfill

Cisco 300-625 is specifically designed to assert the skills and understanding essential for working with the ever-evolving data center technologies. To get accredited, the candidates should gain the passing score in one required core exam and one of 5 concentration tests at choice. If you want to get the professional-level certificate, it is recommended to have at least 3-5 years of hands-on experience in working with implementing data center solutions along with routing and switching. It is not a strict requirement, but this level of expertise will certainly help you deal with both the qualifying exams.

1. Deployment

Weightage – 15%

The first section assesses if the candidates are able to understand the basic concepts like the installation and initial set-up procedures. Also, knowledge of secure boot is needed. Considerable attention should be given to NX-OS, DCNM, and POAP.

Latest Cisco 300-625 Dumps with Test Engine and PDF: https://www.2pass4sure.com/CCNP-Data-Center/300-625-actual-exam-braindumps.html