Q51. Refer to the exhibit

Given the bigip conf extract shown where the servers only talk http on port 80, which node will receive the next user request?

Q52. An LTM device needs an additional traffic group.
Which configuration item is required?

Q53. An LTM specialist needs to upgrade a VCMP quest in an HA Setup with minimum interruption for all VCMP guest instances.
In which should the LTM Specialist perform this upgrade?

Q54. A virtual server is using a TCP profile based on the top-wan-optimized profile for a streaming application Users report videos are loading slowly.
Which setting should be modified in the TCP profile to optimize the application?

Q55. An LTM Specialist has trouble with SNMP traps in the management network The ITM Specialist takes the network capture shown to troubleshoot:

What should the UM Specialist change to capture packets related to this workflow?

Q56. A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?

Q57. Which Standard Virtual Server settings should an LTM Specialist use to load balance across routed path of two different ISPs?

Q58. A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN Which TMOS command enables this behavior?

Q59. Refer to the exhibit.

The http monitor is applied to a pool All members are enabled One pool member stops responding TCP port 80. The server still responds to ping.
What is the resulting status of this pool member?

Q60. A pool with a default connection limit is configured to use Round Robin as the load balancing method. An LTM Specialist needs to ensure that the LTM device selects a server with the fewest number of connections when new clients connect. Another pool is using the same set of backend servers.
Which load balancing-method should the pool be changed to?

Q61. A Client makes the request displayed below to the application server.
Which virtual server type should an LTM Specialist use to load balance based on the URI?
.

Q62. AN LTM Specialist is setting up a new HTTPS virtual server to decrypt client traffic. SNAT the traffic and send the encrypted traffic to the poor member, the client’s IP address must be included in the traffic sent to the pool member.
What is a complete set of profiles that must be configured for the virtual server to meet these requirements?

Q63. An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.
Which monitor type and parameters arc required?

Q64. A pool has four members. Ail of the servers have been designed and configured with the same application. Each client’s request can significantly the performance of the servers.
Which load balancing method should the LTM Specialist use to maintain a relatively even load across all servers?

Q65. An HTTP monitor is created and assigned to a pool with the following non-default configuration:
Interval: 7 seconds
Timeout: 22 seconds
Reverse: Yes
Send String: GET/status.html HTTP/1.1/r/nHost:test.example.com/r/nConnector:Close Receive String: Up The HTTP server sends the following response:

What is the resulting pool status?

Q66. An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment.
What must the LTM Specialist consider before implementing the configuration change?

Q67. RADIUS authentication has been configured on the LTM device. The default remote user access requirements are as shown:
Read only access to the configuration Utility
Access to TMOS shell
Which two items need to be configured in this situation? (Choose two)

Q68. An LTM device is configure with the wildcard virtual servers displayed below.
A client connection is made to 172.24.31.14:443.

Q69. AN LTM Specialist receives reports that an external company application is having reliability issues. The F5 Administrator finds the following in /vat/log/ltm file.

The LTM Specialist determines that the F5 LTM device is entering into Aggressive Mode Adaptive Reaping, which is causing the site reliability issues.
What is the most likely reason that the LTM device has entered into Aggressive Mode Adaptive Reaping?

Q70. When importing a PEM formatted SSL certificate, which text needs to appear first in the file?

Q71. A company plans to launch a huge marketing campaign and expects increase demand of their secure website. With the current virtual server setup, the LTM Specialist expects that the LTM device will reach its capacity limits. For the wen application to function properly. Cookies persistence is required. The LTM Specialist needs to reduce LTM device load without breaking the application.
Which two settings should the LTM Specialist modify to meet the requirement? (Choose two.)

Q72. Exhibit.

The three VLANS shown provide connectivity to backend servers. The backend servers are being moved to unmanaged switches and require separate interfaces.
How should the F5 device interfaces be configured?

Q73. An LTM Specialist must reconfigure a BIG-IP system that load balances traffic to a web application. The security department has informed the LTM Specialist that the following cipher string must be used for TLS connections from BIG-IP to the web application.
NATIVE:IMDS:EXPORT:IDHE:EDH@SPEED
In which virtual server profile should the cipher string be configured?

Q74. An organization’s development team creates an application to put behind the F5 LTM device. The application can be quite load intensive at first, and then evens out over time. The team’s load balancing method needs to select a pool after taking into account the pool member’s response over the time to avoid landing on a busy pool member.
Which of the following load balancing methods meets this requirement?