Juniper JN0-363 Practice Exam – 293 Unique Questions [Q126-Q148]

JN0-363 Juniper

admin • March 9, 2024

Juniper JN0-363 Practice Exam – 293 Unique Questions [Q126-Q148]

4.5/5 - (2 votes)

Juniper JN0-363 Practice Exam – 293 Unique Questions

Latest Questions JN0-363 Guide to Prepare Free Practice Tests

Juniper JN0-363 exam is an excellent certification for individuals who are looking to validate their knowledge and skills in service provider routing and switching technologies. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification demonstrates the candidate’s ability to configure and troubleshoot Juniper Networks service provider routing and switching platforms, which is a valuable asset for service providers and network engineers.

NO.126 Which two statements ate correct about the information shown in the exhibit? (Choose two.)

The root bridge is reachable using the ge-0/0/14 interface.

This switch is the root bridge for this spanning tree topology.

This switch has a bridge priority of 8k.

The root bridge’s priority Is 4k.

NO.127 Exhibit

You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of the show isis adjacency command as shown in the exhibit.
What is the problem in this scenario?

This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.

The family iso statement must be added to the logical interface.

The router at the other end of the link Is not sending any IS-IS Hello messages.

The router at the other end of the link is a Level 1 only router.

NO.128 You have created a routing instance named vr3 that will provide access to Server2 (10.0.0.2) for the hosts on the 10.10.10.0/24 network.
Which command would you use to test connectivity between vr3 and Server2?

user@vr3> ping 10.0.0.2 count 5

user@vr3> ping 10.0.0.2 count 5 source 10.10.10.1

user@router1> ping 10.0.0.2 count 5

user@router1> ping 10.0.0.2 routing-instance vr3 count 5

NO.129 Which two statements are true about IBGP on MX Series devices? (Choose two.)

Neighbors can be located anywhere within the AS

Interface Lo0 must be used for peering

It does not support multihop

It is loop free by default

https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-ibgp-peering.html

NO.130 Referring to the exhibit, what is the minimum number of LSPs required to support alt four networks?

NO.131 What are tree types of interfaces that can be used in an MX Series device when implementing a virtual switch routing instance? (Choose three.)

Trunk interface

Access interface

Layer 2 logical interface

GRE tunnel interface

Logical tunnel interface

NO.132 Exhibit

You are asked to assign interface xe-1/0/5 to a virtual switch.
What must be accomplished to complete the configuration?

Interface xe-1/0/5 must be added to routing-instance sw-1 vlan_2.

Interface xe-1/0’5 must be a trunk port.

Interface xe-1/0/5 must be added to routing-instance sw-1.

An IRB interface must be configured to routing-instance sw-1 vlan_2.

NO.133 Routers R1 and R4 have a VRRP priority of 90, while R2 and R3 have default VRRP priorities Referring to the exhibit, which router will be elected as the primary VRRP router?

NO.134 Click the Exhibit.

Referring to the configuration shown in the exhibit, which statement is true?

Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.2.

Traffic destined to address 192.168.5.1 will alternate between next-hops 172.16.1.2 and 172.16.1.3

Traffic destined to address 192.168.5.1 will take next-hop 10.0.1.1.

Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.3.

NO.135 Click the Exhibit.

Referring to the exhibit, which IS-IS router will be selected as the DIS?

Router 1

Router 4

Router 2

Router 3

NO.136 Referring to the exhibit, which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?

Frames will be counted initially by filterB and then counted by filterA.

Frames will be counted initially by filterA and then counted by filterB.

Frames will be counted by filterA only.

Frames will be counted by filterB only.

NO.137 Which two interface types are used as tunnel endpoints? (Choose two.)

tunnel-end-point name {
ipv4 {
source-address 10.255.1.1;
destination-address 10.255.2.0/25;
}
gre {
key 9;
}
}
https://www.juniper.net/documentation/us/en/software/junos/routing-policy/topics/ref/statement/tunnel-end-point-edit-firewall.html

NO.138 Referring to the exhibit, which two statements are correct? (Choose two.)

Traffic ingressing ge-1/0/0 that is tagged with VLAN 200 will be dropped.

Traffic ingressing ge-1/0/0 that is tagged with VLAN 100 will be dropped.

Traffic ingressing ge-1/0/0 that is tagged with VLAN 100 will egress ge-1/0/4 with an outer VLAN tag of 200.

Traffic ingressing ge-1/0/0 that is tagged with VLAN 200 will egress ge-1/0/4 with an outer VLAN tag of 200.

NO.139 An IS-IS TLV includes which two attributes? (Choose two.)

Topology

Vector

Length

Value

NO.140 How does a Junos device learn about MAC addresses when it is first connected to an Ethernet LAN?

The device sends out a network broadcast message asking tor all devices and MAC addresses on the network and stores this information In addition lo the interface from which the response was received.

The device learns the destination MAC addresses from traffic in the network and stores this MAC address in addition to the interface from which the traffic was received.

The device learns the source MAC addresses from traffic in the network and stores this MAC address in addition to the interface from which the traffic was received.

The device sends out a network multicast message asking for all devices and MAC addresses on the network and stores this Information in addition to the interface from which the response was received.

NO.141 Which statement is correct about the FE80;:/10 prefix?

This prefix range is used for the link local address.

This prefix range is used on the loopback interface.

This prefix range is reserved for multicast applications

This prefix range is not reserved.

NO.142 In which situation would you disable penultimate-hop popping?

When you want to bypass a penultimate router that does not support IPv6 tunneling

When you want to ensure the penultimate router can perform the destination route lookup

When you want to enforce the same class-of-service behavior through the entire LSP

When you want to utilize a penultimate router that supports IPv6 tunneling

NO.143 You are asked to configure an LSP which uses the OSPF link state database for path computations. Which two statements are correct in this scenario? (Choose two.)

You must use the no-cspf parameter in the label-switched-path configuration.

Traffic engineering extensions ate enabled by default In OSPF.

Traffic engineering extensions are not enabled by default in OSPF.

You must use the policing parameter in the label-switched-path configuration.

The no-cspf command will activate usage of OSPF DB https://www.juniper.net/documentation/us/en/software/junos/ospf/topics/topic-map/configuring-ospf-support-for-traffic-engineering.html Not enabled by default for ospf

NO.144 Exhibit

Referring to the exhibit, internal BGP between R1 and R2 is not establishing.
What is the problem In this scenario?

R1 does not have a route to 192.168.200.2.

R1 and R2 must each have unique AS numbers.

R1 needs to be configured with an explicit router ID.

R1 needs to be configured with a next-hop self policy.

NO.145 To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets?

1476

1492

1500

1524

NO.146 Click the Exhibit button.

Referring to the exhibit, which statement is correct?

R2 will be the designated router

R3 will not participate in the election process

R1 will not participate in the election process

R4 will be the designated router

https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf-areas.html#id-example-controlling-ospf-designated-router-election

NO.147 Exhibit

You are asked to configure the OSPF environment to prevent the DRother routers from participating in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?

set protocols ospf area 0.0.0.0 interface ge-0/0/l priority 255

set protocols ospf area 0.0.0.0 interface ge-0/0/1 priority 0

set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type nbma

set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type p2p

NO.148 Which two interface types are used as tunnel endpoints? (Choose two.)

Loading …

The JN0-363 certification exam is an intermediate-level certification exam that requires a solid understanding of networking technologies and concepts. JN0-363 exam tests the candidate’s knowledge of Junos OS, BGP, OSPF, IS-IS, MPLS, Layer 2 VPNs, and Layer 3 VPNs. JN0-363 exam consists of 65 multiple-choice questions that must be completed in 90 minutes. The passing score for JN0-363 certification exam is 65%.

Correct and Up-to-date Juniper JN0-363 BrainDumps: https://www.2pass4sure.com/JNCIS-SP/JN0-363-actual-exam-braindumps.html