Prepare Important Exam with AZ-700 Exam Dumps(2025) [Q109-Q123]

admin • March 6, 2025

Prepare Important Exam with AZ-700 Exam Dumps(2025) [Q109-Q123]

Rate this post

Prepare Important Exam with AZ-700 Exam Dumps(2025)

Pass Exam Questions Efficiently With AZ-700 Questions

Microsoft AZ-700 exam is intended for IT professionals who are responsible for designing and implementing Microsoft Azure Networking Solutions. AZ-700 exam is designed to test your ability to design and implement networking solutions in Microsoft Azure, including virtual networks, load balancers, Azure Firewall, and Azure DNS. You will also be tested on your knowledge of network security, network monitoring, and network optimization.

NEW QUESTION 109
You plan to publish a website that will use an FQDN of www.contoso.com. The website will be hosted by using the Azure App Service apps shown in the following table.

You plan to use Azure Traffic Manager to manage the routing of traffic for www.contoso.com between AS1 and AS2.
You need to ensure that Traffic Manager routes traffic for www.contoso.com.
Which DNS record should you create?

two A records that map wmv.contoso.com to 131 107 100 1 and 131 107 200 1

a CNAME record that maps www.contoso.com to TMprofile1.azurefd.net

a CNAME record that mapswww.contoso.comtoTMprofile1.trafficmanager.net

a TXT record that contains a string ofas1.contoso.com and as2.contoso.com in the details

Reference:
https://docs.microsoft.com/en-us/azure/traffic-manager/quickstart-create-traffic-manager-profile
https://docs.microsoft.com/en-us/azure/app-service/configure-domain-traffic-manager

NEW QUESTION 110
You have two Azure virtual networks named Vnet1 and Vnet2 in an Azure region that has three availability zones.
You deploy 12 virtual machines to each virtual network, deploying four virtual machines per zone. The virtual machines in Vnet1 host an app named App1. The virtual machines in Vnet2 host an app named App2.
You plan to use Azure Virtual Network NAT to implement outbound connectivity for App1 and App2.
You need to identify the minimum number of subnets and Virtual Network NAT instances required to meet the following requirements:
* A failure of two zones must NOT affect the availability of either App1 or App2.
* A failure of two zones must NOT affect the outbound connectivity of either App1 or App2.
What should you identify? To answer, select the appropriate options in the answer are a.
NOTE: Each correct selection is worth one point.

Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/nat-gateway/nat-overview

NEW QUESTION 111
You create NSG10 and NSG11 to meet the network security requirements.
For each of the following statements, select Yes it the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

NEW QUESTION 112
You have an Azure subscription that contains the resource groups shown in the following table.

You have the virtual networks shown in the following table.
Vne1l contains two virtual machines named VM1 and VM2. Vnet2 contains two virtual machines named VM3 and VM4. You have the network security groups (NSGs) shown in the following table that include only default rules.

You have the Azure load balancers shown in the following table.

Explanation:

NEW QUESTION 113
You need to implement name resolution for the cloud.liwareinc.com. The solution must meet the networking requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Reference:
https://docs.microsoft.com/en-us/azure/dns/private-dns-autoregistration
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-name-resolution-for-vms-and-role-instances

NEW QUESTION 114
You have an Azure Private Link service named PL1 that uses an Azure load balancer named LB1. You need to ensure that PL1 can support a higher volume of outbound traffic. What should you do?

Redeploy LB1 with a different SKU.

Increase the number of NAT IP addresses assigned to PL1.

Deploy an Azure Application Gateway v2 instance to the source NAT subnet.

Increase the number of frontend IP configurations for LB1.

NEW QUESTION 115
You plan to deploy Azure Virtual WAN.
You need to deploy a virtual WAN hub that meets the following requirements:
Supports 10 sites that will connect to the virtual WAN hub by using a Site-to-Site VPN connection Supports 8 Gbps of ExpressRoute traffic Minimizes costs What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Reference:
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-about

NEW QUESTION 116
You have an Azure Virtual Desktop deployment that has 500 session hosts.
All outbound traffic to the internet uses a NAT gateway.
During peak business hours, some users report that they cannot access internet resources. In Azure Monitor, you discover many failed SNAT connections.
You need to increase the available SNAT connections.
What should you do?

Add a public IP address.

Bind the NAT gateway to another subnet.

Deploy Azure Standard Load Balancer that has outbound rules.

Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/nat-gateway/nat-gateway-resource

NEW QUESTION 117
Which virtual machines can VM1 and VM4 ping successfully? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Explanation
Text Description automatically generated

Box 1: VM2, VM3 and VM4.
VM1 is in VNet1/Subnet1. VNet1 is peered with VNet2 and VNet3.
There are no NSGs blocking outbound ICMP from VNet1. There are no NSGs blocking inbound ICMP to VNet1/Subnet2, VNet2 or VNet3. Therefore, VM1 can ping VM2 in VNet1/Subnet2, VM3 in VNet2 and VM4 in VNet3.
Box 2:
VM4 is in VNet3. VNet3 is peered with VNet1 and VNet2. There are no NSGs blocking outbound ICMP from VNet3. There are no NSGs blocking inbound ICMP to VNet1/Subnet1, VNet1/Subnet2 or VNet2 from VNet3 (NSG10 blocks inbound ICMP from VNet4 but not from VNet3). Therefore, VM4 can ping VM1 in VNet1/Subnet1, VM2 in VNet1/Subnet2 and VM3 in VNet2.

NEW QUESTION 118
You have an on-premises network.
You have an Azure subscription that contains the resources shown in the following table.

You need to ensure that on-premises devices can communicate with Azure resources that are connected to Subnet4.
What should you do on each resource? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Explanation:

NEW QUESTION 119
You have an Azure subscription.
You have the on-premises sites shown the following table.

You plan to deploy Azure Virtual WAN.
You are evaluating Virtual WAN Basic and Virtual WAN Standard.
Which type of Virtual WAN can you use for each site? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Reference:
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-about

NEW QUESTION 120
You are implementing the virtual network requirements for VM Analyze.
What should you include in a custom route that is linked to Subnet2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Explanation
Graphical user interface, text, application Description automatically generated

Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-udr-overview

NEW QUESTION 121
You need to restrict traffic from VMScaleSet1 to VMScaleSet2. The solution must meet the virtual networking requirements.
What is the minimum number of custom NSG rules and NSG assignments required? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Explanation
Graphical user interface, text, application Description automatically generated

Box 2: One NSG
The minimum requirement is one NSG. You could attach the NSG to VMScaleSet1 and restrict outbound traffic, or you could attach the NSG to VMScaleSet2 and restrict inbound traffic. Either way you would need two custom NSG rules.
Box 1: Two custom rules
With the NSG attached to VMScaleSet2, you would need to create a custom rule blocking all traffic from VMScaleSet1. Then you would need to create another custom rule with a higher priority than the first rule that allows traffic on port 443.
The default rules in the NSG will allow all other traffic to VMScaleSet2.

NEW QUESTION 122
You have an on-premises datacenter.
You have an Azure subscription that contains 10 virtual machines and a virtual network named VNe1l in the East US Azure region. The virtual machines are connected to VNet1 and replicate across three availability zones.
You need to connect the datacenter to VNetl1by using ExpressRoute. The solution must meet the following requirements:
* Maintain connectivity to the virtual machines if two availability zones fail.
* Support 1000-Mbps connections-
What should you include in the solution? To answer, select the appropriate options in the answer area. NOTE:
Each correct selection is worth one point.

Explanation

NEW QUESTION 123
You need to prepare Vnet1 for the deployment of an ExpressRoute gateway. The solution must meet the hybrid connectivity requirements and the business requirements.
Which three actions should you perform in sequence for Vnet1? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

1 – Set the subnet mask of GatwaysSubnet to/27.
2 – Assign a user defined route to GatewaySubnet.
3 – Create a VPN gateway by using the Basic SKU.
Topic 1, Litware. Inc
Existing Environment:
Hybrid Environment
The on-prernises network contains an Active Directory forest named litwareinc.com that syncs to an Azure Active Directory (Azure AD) tenant named litwareinc.com by usinq Azure AD Connect.
All the offices connect to a virtual network named Vnetl by using a Site-to-Site VPN connection.
Azure Environment
Litware has an Azure subscription named Sub1 that is linked to the litwareinc.com Azure AD tenant. Sub1 contains resources in the East US Azure region as shown in the following table.

There is bidirectional peering between Vnet1 and Vnet2. There is bidirectional peering between Vnet1 and Vnet3. Currently, Vnet2 and Vnet3 cannot communicate directly.
Requirements:
Business Requirements
Litware wants to minimize costs whenever possible, as long as all other requirements are met.
Virtual Networking Requirements
Litware identifies the following virtual networking requirements:
* Direct the default route of 0.0.0.0/0 on Vnet2 and Vnet3 to the Boston datacenter over an ExpressRoute circuit.
* Ensure that the records in the cloud.litwareinc.com zone can be resolved from the on-premises locations.
* Automatically register the DNS names of Azure virtual machines to the cloud.litwareinc.com zone.
* Minimize the size of the subnets allocated to platform-managed services.
* Allow traffic from VMScaleSet1 to VMScaleSet2 on the TCP port 443 only.
Hybrid Networking Requirements
Litware identifies the following hybrid networking requirements:
* Users must be able to connect to Vnet1 by using a Point-to-Site (P2S) VPN when working remotely. Connections must be authenticated by Azure AD.
* Latency of the traffic between the Boston datacenter and all the virtual networks must be minimized.
* The Boston datacenter must connect to the Azure virtual networks by using an ExpressRoute FastPath connection.
* Traffic between Vnet2 and Vnet3 must be routed through Vnet1.
PaaS Networking Requirements
Litware identifies the following networking requirements for platform as a service (PaaS):
* The storage1 account must be accessible from all on-premises locations without exposing the public endpoint of storage1.
* The storage2 account must be accessible from Vnet2 and Vnet3 without exposing the public endpoint of storage2.

Loading …