CCNP Security 300-730 Exam Dumps and Certification Test Engine [Q128-Q146]

300-730 Cisco

admin • October 1, 2025

CCNP Security 300-730 Exam Dumps and Certification Test Engine [Q128-Q146]

Rate this post

(PDF) CCNP Security 300-730 Exam and Certification Test Engine

Use 300-730 Exam Dumps (2025 PDF Dumps) To Have Reliable 300-730 Test Engine

Cisco 300-730 exam is a highly specialized certification that focuses on implementing secure solutions with virtual private networks. 300-730 exam is designed for IT professionals who specialize in VPN technologies and advanced security. 300-730 exam covers a broad range of topics, including VPN technologies, secure access, advanced security, and more. Passing 300-730 exam is a significant achievement and will open up a variety of career opportunities in the field of network security.

NO.128 Which parameter is initially used to elect the primary key server from a group of key servers?

code version

highest IP address

highest-priority value

lowest IP address

NO.129 What is a requirement for smart tunnels to function properly?

Java or ActiveX must be enabled on the client machine.

Applications must be UDP.

Stateful failover must not be configured.

The user on the client machine must have admin access.

Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/111007-smart-tunnel-asa-00.html

NO.130 Refer to the exhibit.

Based on the debug output, which type of mismatch is preventing the VPN from coming up?

interesting traffic

lifetime

preshared key

PFS

The first of the two TS payloads is known as TSi (Traffic Selector- initiator). The second is known as TSr (Traffic Selector-responder). TSi specifies the source address of traffic forwarded from (or the destination address of traffic forwarded to) the initiator of the Child SA pair. https://www.rfc-editor.org/rfc/rfc5996#page-40 If the responder’s policy does not allow it to accept any part of the proposed Traffic Selectors, it responds with a TS_UNACCEPTABLE Notify message.

NO.131 Refer to the exhibit.

Which VPN technology is allowed for users connecting to the Employee tunnel group?

SSL AnyConnect

IKEv2 AnyConnect

crypto map

clientless

NO.132 Refer to the exhibit. What is configured as a result of this command set?

FlexVPN client profile for IPv6

FlexVPN server to authorize groups by using an IPv6 external AAA

FlexVPN server for an IPv6 dVTI session

FlexVPN server to authenticate IPv6 peers by using EAP

The configuration snippet is an identical match to the server configuration when you look it up.
Not the client.

NO.133 Refer to the exhibit. The VPN tunnel between the FlexVPN spoke and FlexVPN hub 192.168.0.12 is failing.
What should be done to correct this issue?

Add the address 192.168.0.12 255.255.255.255 command to the keyring configuration.

Add the match fvrf any command to the IKEv2 policy.

Add the aaa authorization group psk list Flex_AAA Flex_Auth command to the IKEv2 profile configuration.

Add the tunnel mode gre ip command to the tunnel configuration.

NO.134 Refer to the exhibit. A new IPsec VPN tunnel has been configured and the security associations do not establish. After the show crypto isakmp command is run, the output is displayed. What must be reconfigured to resolve the issue?

peer address

transform sets

pre-shared key

keep-alive values

The output of the show crypto isakmp command shows that the VPN is stuck in MM_WAIT_MSG_6 state. This state means that IKE Phase 1 negotiation is incomplete because the initiator is waiting for the final message from the responder.
A common cause for this issue is a pre-shared key mismatch between the two VPN peers. If the pre-shared key does not match, the peers fail to authenticate each other, preventing the IKE Security Association (SA) from establishing.

NO.135 Which configuration construct must be used in a FlexVPN tunnel?

EAP configuration

multipoint GRE tunnel interface

IKEv1 policy

IKEv2 profile

Section: Remote access VPNs

NO.136 A network administrator is troubleshooting a FlexVPN tunnel. The hub router is unable to ping the spoke router’s tunnel interface IP address of 192.168.1.2, even though the tunnel is showing up.
The output of the debug ip packet CLI command on the hub router shows the following entry.
IP: tableid=0123456789 s=192.168.1.1 (local), d=192.168.1.2 (loopback2), routed via FIB.
What must be configured to fix this issue?

A matching IKEv2 pre-shared key on the hub and spoke routers in the crypto keyring configuration.

An outbound ACL on the dynamic VTI of the hub router that allows ICMP traffic to 192.168.1.2.

An IKEv2 authorization policy must be configured on the spoke router to advertise the interface route.

A route map must be configured on hub router to set the next hop for 192.168.1.2 to the dynamic VTI.

NO.137 Over the weekend, an administrator upgraded the Cisco ASA image on the firewalls and noticed that users cannot connect to the headquarters site using Cisco AnyConnect. What is the solution for this issue?

Upgrade the Cisco AnyConnect client version to be compatible with the Cisco ASA software image.

Upgrade the Cisco AnyConnect Network Access module to be compatible with the Cisco ASA software image.

Upgrade the Cisco AnyConnect client driver to be compatible with the Cisco ASA software image.

Upgrade the Cisco AnyConnect Start Before Logon module to be compatible with the Cisco ASA software image.

https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asa-vpn-compatibility.html#Cisco_Reference.dita_60cec583-01b8-4cb2-a6e3-2fe87a6b0f82

NO.138 Which two commands help determine why the NHRP registration process is not being completed even after the IPsec tunnel is up? (Choose two.)

show crypto isakmp sa

show ip traffic

show crypto ipsec sa

show ip nhrp traffic

show dmvpn detail

NO.139 Refer to the exhibit.

The DMVPN spoke is not establishing a session with the hub. Which two actions resolve this issue? (Choose two.)

Change the spoke nhs to 172.16.18.1 and the nbma to 10.0.0.1.

Change the transform set to mode tunnel.

Change the ISAKMP policy authentication on the spoke to pre-shared.

Change the ISAKMP key address on the spoke to 0.0.0.0.

Change the nhrp authentication key on the spoke to cisco123.

NO.140 An engineer is creating an URL object on Cisco FMC. How must it be configured so that the object will match for HTTPS traffic in an access control policy?

Specify the protocol to match (HTTP or HTTPS).

Use the FQDN including the subdomain for the website.

Use the subject common name from the website certificate.

Define the path to the individual webpage that uses HTTPS.

Use the FQDN including the subdomain for the website. According to the Firepower Management Center Configuration Guide, Version 6.61, when you create a URL object, you must use the fully qualified domain name (FQDN) of the website, including any subdomains, and omit the protocol prefix (HTTP or HTTPS). For example, to match www.example.com, you must enter www.example.com as the URL object value, not http://www.example.com or
https://www.example.com. The system automatically matches both HTTP and HTTPS traffic for the same FQDN. Specifying the protocol to match (HTTP or HTTPS) is not required and will result in an invalid URL object. Using the subject common name from the website certificate or defining the path to the individual webpage that uses HTTPS are not supported options for URL objects.

NO.141 What are two advantages of using GETVPN to traverse over the network between corporate offices? (Choose two.)

It has unique session keys for improved security.

It supports multicast.

It has QoS support.

It is a highly scalable any to any mesh topology.

It supports a hub-and-spoke topology.

NO.142 An organization wants to distribute remote access VPN load across 12 VPN headend locations supporting 25,000 simultaneous users. Which load balancing method meets this requirement?

one VPN profile per site

DNS-based load balancing

AnyConnect native load balancing

equal cost, multipath load balancing

NO.143 Which technology works with IPsec stateful failover?

GLBR

HSRP

GRE

VRRP

Reference:
https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ ft_vpnha.html#wp1122512

NO.144 Refer to the exhibit. A network engineer is reconfiguring clientless SSLVPN during a maintenance window, and after testing the new configuration, is unable to establish the connection. What must be done to remediate this problem?

Enable client services on the outside interface.

Enable clientless protocol under the group policy.

Enable DTLS under the group policy.

Enable auto sign-on for the user’s IP address.

NO.145 Refer to the exhibit.

An engineer has configured a spoke to connect to a FlexVPN hub. The tunnel is up, but pings fail when the engineer attempts to reach host 192.168.200.10 behind the spoke, and traffic is sourced from host 192.168.100.3, which is behind the FlexVPN server. Based on packet captures, the engineer discovers that host 192.168.200.10 receives the icmp echo and sends an icmp reply that makes it to the inside interface of the spoke. Based on the output in the exhibit captured on the spoke by the engineer, which action resolves this issue?

Add the aaa authorization group cert list default default command to the spoke ikev2 profile.

Add the route set remote ipv4 192.168.200.0 255.255.255.0 command to the hub authorization policy.

Add the aaa authorization group cert list default default command to the hub ikev2 profile.

Add the route set remote ipv4 192.168.100.0 255.255.255.0 command to the spoke authorization policy.

NO.146

Refer to the exhibit. A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the syslog message, which action brings up the VPN tunnel?